Using the TLV246x as a multiplexer lends itself to certain applications where system signals are only measured at power up, or are measured infrequently or periodically at slow sampling rates during o

Inductive-Based Switching Regulator Circuits Provide High-Efficiency White-LED Drives

The RF1A radio module consists of the CC1101-based radio core and the RF1A interface which interfaces the MSP430F5xx and the radio core within the CC430 devices. The RF1A library provides functions that implement the most common operations when using the RF1A interface such as sending command strobes reading and writing the RF configuration registers and writing to the PA Table. This applicati

AN-880 Network Benchmarking

DRV8812, DRV8813, DRV8828, DRV8829, DRV8841, DRV8843 Optimizing High Level Micro Stepping of DRV88xx Driver

DLP4500, DLP LightCrafter4500 Using DLP LightCrafter 4500 Triggers to Synchronize Cameras To Patterns DLP4500 DLPA036 DLP/Application_Reports

Grid-Connected Micro Solar inverter Implement Using a C2000 MCU

This application is a general guide for using Texas Instruments CDCV857/CDCV857A double data rate (DDR) clock driver. This report presents methods for using the device efficiently along with results o

This application report describes how the Texas Instruments (TI)(tm) TMS320C20x digital signal processor (DSP) can be interfaced to the Intel(tm) 28F010 flash memory. The 28Fxxx flash memory are 5V me

The ADS1202 is a precision 80dB dynamic range delta-sigma(ΔΣ) modulator operating from a single +5V supply. The differential inputs are ideal for direct connections to transducers or low-level signals such as shunt resistors. With the appropriate digital filter and modulator rate the device can be used to achieve 15-bit analog-to-digital (A/D) conversion with no missing codes. This

Three simple Compare Units can generate up to 3 PWM. The Time base for Simple Compare Unit is provided by the General Purpose Timer 1 or General Purpose Timer 2. The Simple Compare Module can be used in parallel with the Full Compare module and generate 3 additional phases with an independent time base. There is no possibility to generate complemented output with Simple Compare Output.

This application report illustrates how to apply the LMZ14203 integrated buck module into the buck-boost configuration such that a positive input voltage can be used to create a regulated negative output voltage.

AN-899 Operating and Evaluating Quadrature Modulators for Personal Communication Syst ems

AN-770 PC16552C Dual UART/DMA Micro Channel Adapter

This application report describes the working and operation of a modified version of the hardware and software described in the application report A Simple Glass-Breakage Detector Using the MSP430 (SLAA351). This modified version is more robust with comparable current consumption values to the simple glass-breakage detector. Hardware and software changes are made to the previous design to impro

The Texas Instruments low frequency half-duplex (HDX) transponder technology allows the possibility to improve the communication distance between the transponder and reader. This application report provides information for the calculation of the basic system parameters.

The TMS37157 TI transponder IC is based on the TI HDX RFID concept. Using the given formulas the performance and component

The evaluation board is designed to help the evaluation of the Texas Instruments LMH2110 which is a 45dB Logarithmic RMS power detector particularly suited for accurate power measurement of modulated RFsignals that exhibit large peak-to-average ratios that is large variations of the signal envelope. Suchsignals are encountered in W-CDMA and LTE cell phones. The RMS measurement topology in

HotRod Quad flatpack No Leads (QFN) are leadless packages specifically designed for power applications. The small footprint standard QFN pitch low parasitics along with high current capability of these packages are ideal for power converters application. The electrical connections are made via lands on the bottom side of the component to the surface of the connecting substrate (PCB). This applic

AN028 -- Improved LC Filter