Precision Amplifiers Dual Low Voltage Micropower OP Amp

Series Voltage Reference IC Fixed 5V V ±0.2% 20 mA 3-DFN (2x2)

Analogue Switch ICs Low C, Low Charge Injection,+/-15V/+12V2x

Multiplexer Switch ICs PDIP WIDEBAND 4:1 BUFFERED MULTIPLEXER

Clock Drivers & Distribution 800MHz 3-Chan Clock Distribution

Digital Potentiometer ICs 6 Channel 8-Bit Digital Potentiometer

Operational Amplifiers - Op Amps SOIC SINGLE LOW POWER OP AMP

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

Low Power, +5V CMOS RS-232 100kBPS Transceiver with 5 Drivers and 3 Receivers Features: Single 5 V Power Supply Meets All EIA-232-E and V.28 Specifications 120 kB/s Data Rate On-Board DC-DC Converters ±9 V Output Swing with 5 V Supply Small 1 µF Capacitors Low Power Shutdown ≤ µA Receivers Active in Shutdown (ADM223) ±30 V Receiver Input Levels Latch-Up FREE Plug-In Upgrade for MAX223/230-241 Plug-In Upgrade for AD230–AD241

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

Operational Amplifiers - Op Amps VLTG-FDBK, G= 2 CLAMP AMP

Tiny 16-Bit SPI nanoDAC+, with 2 (16-Bit) LSB INL and 2 ppm/C Reference Features: Ultrasmall package: 2 mm × 2 mm, 8-lead LFCSP High relative accuracy (INL): ±2 LSB maximum at 16 bits AD5683R/AD5682R/AD5681R Low drift, 2.5 V reference: 2 ppm/°C typical Selectable span output: 2.5 V or 5 V Total unadjusted error (TUE): 0.06% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.05% of FSR maximum Low glitch: 0.1 nV-sec High drive capability: 20 mA Low power: 1.2 mW at 3.3 V Independent logic supply: 1.62 V logic compatible Wide operating temperature range: −40°C to +105°C Robust 4 kV HBM ESD protection

Quad, 16-Bit nanoDAC+ with SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum @ 16 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 1.8 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

12-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter Features: SNR = 64.8 dBFS @ fIN up to 70 MHz @ 250 MSPS ENOB of 10.5 @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS) SFDR = 80 dBc @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS) Excellent Linearity DNL = ±0.3 LSB typical INL = ±0.7 LSB typical CMOS outputs Single data port at up to 250 MHz Interleaved dual port @ 1/2 sample rate up to 125 MHz 700 MHz full power analog bandwidth On-chip reference, no external decoupling required Integrated input buffer and track-and-hold Low power dissipation 272 mW @ 170 MSPS 364 mW @ 250 MSPS Programmable input voltage range 1.0 V to 1.5 V, 1.25 V nominal 1.8 V analog and digital supply operation Selectable output data format (offset binary, twos complement, Gray code)

16-Bit, 100 kSPS, Parallel I/O A/D Converter Features: Fast 16-Bit ADC 100 kSPS Throughput Single 5 V Supply Operation Input Range: ±10 V 100 mW Max Power Dissipation Choice of External or Internal 2.5 V Reference High Speed Parallel Interface On-Chip Clock 28-Lead Skinny DIP, SSOP or SOIC Packages

Quad VGA with Ultralow Noise Preamplifier and Programmable RIN Features: Ultralow noise preamplifier (preamp) Voltage noise = 0.74 nV/√Hz Current noise = 2.5 pA/√Hz 3 dB bandwidth: 100 MHz Low power: 145 mW/channel Wide gain range with programmable postamp −4.5 dB to +43.5 dB in LO gain mode 7.5 dB to 55.5 dB in HI gain mode Low output-referred noise: 48 nV/√Hz typical Active input impedance matching Optimized for 10-bit/12-bit ADCs Selectable output clamping level Single 5 V supply operation AD8332 and AD8334 available in lead frame chip scale package

Poly Phase Multi-functional Metering IC With Serial Port Features: Exceeds IEC61036/60687 Less than 0.1% error in Active Energy over dynamic range of 1000:1 Active and Apparent Energy, Vrms and Irms measurements High Frequency pulse output Voltage SAG and Zero-crossing Current and Voltage Peak Reverse Active Power Frequency/Period Measurement On chip Temperature Sensor and Voltage Reference (2.4 V) Low Power (50 mW typical)

General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC

Digital Potentiometer ICs QUAD 8-BIT POTENTIOMETER 1 OHM

Diversity Receiver Chipset Features: Dual IF Inputs, 70 MHz–250 MHz Diversity or Two Independent IF Signals Separate Attenuation Paths Oversample RF Channels 20 MSPS on a Single Carrier 10 MSPS/Channel in Diversity Mode Total Signal Range 90+ dB 30 dB from Automatic Gain-Ranging (AGC) 60 dB from A/D Converter Range >100 dB After Processing Gain See datasheet for additional features