Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

Very High Common-Mode Voltage Precision Difference Amplifier Features: ±600 V common-mode voltage range Rail-to-rail output Fixed gain of 1 Wide power supply range of ±2.5 V to ±18 V 550 μA typical power supply current Excellent ac specifications 90 dB minimum CMRR 310 kHz bandwidth High accuracy dc performance ±5 ppm maximum gain nonlinearity ±10 µV/°C maximum offset voltage drift ±5 ppm/°C maximum gain drift Download AD8479-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request A62/19619 VID DSCC Drawing Number

12 Bit Digital to Analog Converter 1 8-SO

Isolated Module DC DC Converter 1 Output 1.8 ~ 12V 500mA 3.1V - 31V Input

Single/Dual, +15 V/5 V, 256-Position, I2C-Compatible Digital Potentiometer Features: AD5280: 1 channel AD5282: 2 channels 256 positions +10 V to +15 V single supply; ±5.5 V dual-supply operation 20 kΩ, 50 kΩ, 200 kΩ fixed terminal resistance Low temperature coefficient: 30 ppm/°C Power-on midscale preset1  Programmable reset Operating temperature: −40°C to +85°C I2C-compatible interface

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC Features: Multiple pins/software programmable input ranges: 5 V, 10 V, ±5 V, ±10 V Pins or serial SPI®-compatible input ranges/mode selection Throughput: 250 kSPS 16-bit resolution with no missing codes INL: ±0.75 LSB typ, ±1.5 LSB max (±23 ppm of FSR) SNR: 94 dB @ 2 kHz iCMOS® process technology 5 V internal reference: typical drift 3 ppm/°C On-chip temperature sensor No pipeline delay (SAR architecture) Parallel (16- or 8-bit bus) and serial 5 V/3.3 V interface SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible Power dissipation 90 mW @ 250 kSPS 10 mW @ 1 kSPS 48-lead LQFP and LFCSP (7 mm × 7 mm) packages

+2.7 V to +5.5 V, 200 kSPS 8-Bit Sampling ADC Features: 8-Bit ADC with 4.5 µs Conversion Time On-Chip Track and Hold Operating Supply Range: 2.7 V to 5.5 V 8-Bit Parallel Interface 8-Bit Read Analog Input Range: 0 V to VREF Reference Input Range: 1.2 V to VDD Specifications at 2.7 V–3.6 V and 5 V ± 10% Power Performance Normal Operation    10.5 mW, VDD = 3 V Automatic Power-Down    57.75 µW @ 1 kSPS, VDD = 3 V

Ultra-Low-Noise, High-Accuracy 2.5V Voltage Reference Features: Maximum temperature coefficient (TCVOUT): 0.8 ppm/°C (D grade 0°C to 70°C) 1 ppm/°C (C grade 0°C to 70°C) 2 ppm/°C (B grade −40°C to +125°C) 4 ppm/°C (A grade 40°C to +125°C) Output noise (0.1 Hz to 10 Hz): 1 μV p-p at VOUT of 2.048 V typical Initial output voltage error: B, C, D grade: ±0.02% (maximum) Input voltage range: 3 V to 15 V Operating temperature: A grade and B grade: −40°C to +125°C C grade: 0°C to +70°C Output current: +10 mA source/−10 mA sink Low quiescent current: 950 μA (maximum) Low dropout voltage: 300 mV at 2 mA (VOUT ≥ 3 V) 8-lead SOIC package and LCC package AEC-Q100 qualified for automotive applications Long-term drift: 8 ppm typical at 4500 hours

Ultra-Low-Noise, High-Accuracy 4.096V Voltage Reference Features: Maximum temperature coefficient (TCVOUT): 0.8 ppm/°C (D grade 0°C to 70°C) 1 ppm/°C (C grade 0°C to 70°C) 2 ppm/°C (B grade −40°C to +125°C) 4 ppm/°C (A grade 40°C to +125°C) Output noise (0.1 Hz to 10 Hz): 1 μV p-p at VOUT of 2.048 V typical Initial output voltage error: B, C, D grade: ±0.02% (maximum) Input voltage range: 3 V to 15 V Operating temperature: A grade and B grade: −40°C to +125°C C grade: 0°C to +70°C Output current: +10 mA source/−10 mA sink Low quiescent current: 950 μA (maximum) Low dropout voltage: 300 mV at 2 mA (VOUT ≥ 3 V) 8-lead SOIC package and LCC package AEC-Q100 qualified for automotive applications Long-term drift: 8 ppm typical at 4500 hours

5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter Features: Wideband RF output frequency range: 5.9 GHz to 23.6 GHz Two upconversion modes Direct conversion from baseband I/Q to RF Single sideband upconversion from real IF LO input frequency range: 5.4 GHz to 14 GHz LO doubler for up to 28 GHz Matched 100 Ω balanced RF output, LO input, and IF input High impedance baseband inputs Sideband suppression and carrier feedthrough optimization Variable attenuator and power detector for Tx power control Programmable via 4-wire SPI interface 32-lead, 5 mm × 5 mm LFCSP microwave packaging

Low Power Blackfin with Consumer Devices Connectivity Features: Blackfin processor core with up to 400 MHz (800 MMACS) performance 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels 12 peripheral DMA channels supporting one- and two-dimensional data transfers Lockbox™ Secure Technology: Hardware-enabled security for code and content protection Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM 176-p, 0.5 mm pitch, 24 X 24 LQFP is offered in Commercial Temp. (0C to +70C) and Industrial Temp (-40C to +85C) 168-ball BGA package is offered in Commercial Temp. (0C to +70C) and Industrial Temp (-40C to +85C)

400 MHz High Performance Blackfin Processor Features: Up to 600 MHz high performance Blackfin processor Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs, 40-bit shifter RISC-like register and instruction model for ease of programming and compiler-friendly support Advanced debug, trace, and performance monitoring Wide range of operating voltages Qualified for Automotive Applications Programmable on-chip voltage regulator 160-ball CSP_BGA, 169-ball PBGA, and 176-lead LQFP packages See datasheet for additional features

SPI-/I2C-Compatible, 10-Bit Digital Temperature Sensor and 8-Channel ADC Features: 10-bit temperature-to-digital converter  10-bit 8-channel ADC  DC input bandwidth  Input range: 0 V to 2.25 V and 0 V to VDD Temperature range: −40°C to +120°C  Temperature sensor accuracy of ±0.5°C  Supply range: 2.7 V to 5.5 V  Power-down current : <10 μA Internal 2.25 VREF option Double-buffered input logic  I2C, SPI, QSPI™, MICROWIRE™, and DSP compatible 4-wire serial interface  SMBus packet error checking (PEC) compatible 16-lead QSOP

Quad-Channel Isolators with Integrated DC-to-DC Converter (3:1 directionality) Features: isoPower integrated, isolated dc-to-dc converter 100 mA output supply AEC-Q100 qualified for automotive applications ADuM6421AW (ADuM6423AW pending) Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB Quad dc to 100 Mbps signal isolation channels 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage High temperature operation: 125°C maximum High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals (pending) UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE V 0884-11 certificate of conformity (pending) VIORM = 566 V peak CQC certification per GB4943.1-2011 (pending)

3GHz HDMI 2:2 cross point Transceiver with On-Screen Display Features: 2-input, 2-output cross-point HDMI® transceiver HDMI support 3 GHz video support (e.g. 4k × 2k) Audio return channel (ARC) 3D TV support Content type bits CEC 1.4-compatible Extended colorimetry High-Bandwidth Digital Content Protection (HDCP 1.4) Ultralow jitter digital PLL (100% deskew) Character- and icon-based on-screen display (OSD) 3D OSD overlay on all mandatory 3D formats Support for OSD overlay on 3 GHz video formats HDCP repeater support: up to 127 KSVs supported 300 MHz maximum TMDS clock frequency (up to 4k × 2k) 48-, 36-, 30-bit deep colour input modes supported See data sheet for additional features

16-Bit 8-/16-Channel ADC with PGA and Easy Drive Input Current Cancellation Features: Up to 8 Differential or 16 Single-Ended Inputs Easy Drive™ Technology Enables Rail-to-Rail Inputs with Zero Differential Input Current Directly Digitizes High Impedance Sensors with Full Accuracy 600nVRMS Noise Programmable Gain from 1 to 256 Integrated High Accuracy Temperature Sensor GND to VCC Input/Reference Common Mode Range Programmable 50Hz, 60Hz or Simultaneous 50Hz/60Hz Rejection Mode 2ppm INL, No Missing Codes 1ppm Offset and 15ppm Full-Scale Error 2x Speed Mode/Reduced Power Mode (15Hz Using Internal Oscillator and 80μA at 7.5Hz Output) No Latency: Digital Filter Settles in a Single Cycle, Even After a New Channel Is Selected Single-Supply 2.7V to 5.5V Operation Internal Oscillator Tiny 5mm × 7mm QFN Package

600mA Universal Multi-Output LED/CAM Driver Features: Low Noise, Multi-Mode Charge Pump (1x, 1.5x, 2x) Provides Up to 91% Efficiency Slew Limited Switching Reduces Conducted and Radiated Noise (EMI) Up to 600mA Total Output Current Twelve 28mA Universal Current Sources with 64-Step Linear Brightness Control 425mA CAM LED Current Source with 16-Step Linear Brightness Control and 2-Second High Current Safety Timer Independent On/Off, Brightness Level, Blinking and Gradation Control for Each Current Source Using 2-Wire I2C Interface Internal Current Reference Two I2C Addresses are Available (LTC3207 00110110, LTC3207-1 00110100) Configurable ENU Pin for Asynchronous LED On/Off Control Automatic or Forced Mode Switching Internal Soft-Start Limits Inrush Current Short-Circuit/Thermal Protection 4mm × 4mm 24-Pin QFN Plastic Package

14-Bit, 125Msps Dual-Channel IF/Baseband Receiver Subsystem Features: Integrated Dual 14-Bit, High-Speed ADC, Passive Filters and Fixed Gain Differential Amplifiers Up to 300MHz IF Range Lowpass and Bandpass Filter Versions Integrated Low Noise, Low Distortion Amplifiers Fixed Gain: 8dB, 14dB, 20dB or 26dB 50Ω, 200Ω or 400Ω Input Impedance Integrated Bypass Capacitance, No External Components Required 66dB SNR Up to 140MHz Input (LTM9002-AA) 76dB SFDR Up to 140MHz Input (LTM9002-AA) Auxiliary 12-Bit DACs for Gain Adjustment Clock Duty Cycle Stabilizer Single 3V to 3.3V Supply Low Power: 1.3W (665mW/ch.) Shutdown and Nap Modes 15mm × 11.25mm LGA Package

Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference 2.5V Full-Scale 10ppm/°C (LTC2636-L) 4.096V Full-Scale 10ppm/°C (LTC2636-H) Maximum INL Error: 2.5LSB (LTC2636-12) Low Noise: 0.75mVP-P 0.1Hz to 200KHz Guaranteed Monotonic Over –40°C to 125°C Temperature Range Selectable Internal or External Reference 2.7V to 5.5V Supply Range (LTC2636-L) Ultralow Crosstalk Between DACs (<2.4nV•s) Low Power: 0.9mA at 3V (LTC2636-L) Power-On-Reset to Zero-Scale/Mid-Scale Double-Buffered Data Latches Tiny 14-Lead 4mm × 3mm DFN and 16-Lead MSOP Packages

6A DC/DC Module Regulator with Tracking and Frequency Synchronization Features:Complete Standalone Power SupplyWide Input Voltage Range: 4.5V to 26.5V6A DC Typical, 8A Peak Output Current0.8V to 5V OutputOutput Voltage Tracking±1.75% Maximum Total DC ErrorCurrent Mode Control/Fast Transient ResponsePhase-Lockable Fixed Frequency 250kHz to 780kHzOn-Board Frequency SynchronizationSelectable Burst Mode® OperationPower Good Voltage IndicatorOutput Overvoltage ProtectionOutput Current Foldback Limiting9mm × 15mm × 4.32mm LGA and 9mm × 15mm × 4.92mm BGA Packages