+5V Precision Voltage Reference/Temperature Transducer

IC AMP SENSOR SIGNAL SMD SOIC8; No. of Amplifiers:1 Amplifier; Input Offset Voltage:12µV; Slew Rate:-; Bandwidth:2MHz; Supply Voltage Range:2.7V to 5.5V; Amplifier Case Style:SOIC; No. of Pins:8Pins; Amplifier Output:Single Ended / Differential; CMRR:112dB; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:AD8557 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:2.7V to 5.5V; Base Number:8557; No. of Amplifiers:1Amplifiers; Operating Temperature Range:-40°C to +125°C; Programmable Gain Max:1300; Programmable Gain Min:28; Supply Current:1.8mA; Termination Type:Surface Mount Device

3.3 V Dual-Loop 50 Mbps to 3.3 Gbps Laser Diode Driver

622 Mbps Clock and Data Recovery IC

Single-Supply 42 V System Difference Amplifier

Single, Integer-N, 550 MHz PLL With Programmable Prescaler And Charge Pump Features: ADF4110: 550 MHz ADF4111: 1.2 GHz ADF4112: 3.0 GHz ADF4113: 4.0 GHz +2.7 V to +5.5 V Power Supply Separate Vp Allows Extended Tuning Voltage in 3V Systems Programmable Charge Pump Currents Programmable Dual Modulus Prescaler 8/9, 16/17, 32/33, 64/65 Programmable Anti-Backlash Pulse Width 3-Wire Serial Interface Digital Lock Detect Power Down Mode

Analogue to Digital Converter 16 bit 3 MSPS Single 2.35 V 3.6 V TSOT

250 kSPS, 6-Channel, Simultaneous Sampling, Bipolar 16-/14-/12-Bit ADC

Digital PAL/NTSC Video Encoder with Six DACs (10 Bits), Color Control and Enhanced Power Management

DIGITAL POT 100KOHM SINGLE TSSOP-14; End To End Resistance:100kohm; No. of Pots:Single; Control Interface:I2C; Resistance Tolerance:-30% +50%; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:TSSOP; No. of Pins:14Pins; No. of Steps:256; Temperature Coefficient:± 30ppm/°C; Operating Temperature Min:-40°C; Operating Temperature Max:105°C; Packaging:Each; Product Range:Single 256-Tap Volatile Digital Pots; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

300 MHz to 1000 MHz Quadrature Modulator

High Voltage, Low Noise, Low Distortion, Unity-Gain Stable, High Speed Op Amp

500 kSPS, 4-Channel, Software Selectable True bipolar Input, 12-Bit Plus Sign A/D Converter Features: 12-bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges  ±10 V, ±5 V, ±2.5 V, 0 V to +10 V 500 kSPS throughput rate Four analog input channels with channel sequencer Single-ended, true differential, and pseudo differential analog input capability High analog input impedance Low power: 18 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface Power-down modes 16-lead TSSOP package iCMOS process technology

EMI/EMC Compliant, 15 kV ESD Protected, RS-232 Line Drivers/Receivers Features: Complies with 89/336/EEC EMC Directive  ESD Protection to IEC1000-4-2 (801.2)  ±8 kV: Contact Discharge  ±8 kV: Contact Discharge  ±15 kV: Human Body Model  TSSOP Package Option  EFT Fast Transient Burst Immunity (IEC1000-4-4)  Low EMI Emissions (EN55022)  230 kbits/s Data Rate Guaranteed  Upgrade for MAX202E, 232E, LT1181A 

IC Operational Amplifier SINGLE BIPOLAR LLCC 8PIN PLASTIC

IC VOLT DETECTOR FIXED +2.63V CMOS SOP 8PIN PLASTIC

CMOS, 1.8 V to 5.5 V/2.5 V, 3 Low Voltage 4-/8-Channel Multiplexers

4-Channel, LVDS, Dual-Output, Laser Diode Driver with Oscillator Features: Dual, current-controlled output current sources with 4 input channels TTL-selectable output Stable on-chip oscillators with independent frequency and amplitude control TTL- or LVDS-selectable write channel enables negative logic Independent TTL oscillator enables positive logic 170 mA minimum output current for the read channel 510 mA minimum output current for Write Channel 1 330 mA minimum output current for Write Channel 2 165 mA minimum output current for Write Channel 3 950 mA typical total output current Typical rise time/fall time of  0.8 ns Low power consumption Single 5 V power supply (±10%)

10-/12-Bit, Low Power, Broadband MxFE Features: Dual 10-bit/12-bit, 100 MSPS ADC SNR = 67 dB, fIN = 30.1 MHz Dual 10-bit/12-bit, 170 MSPS DAC  ACLR = 74 dBc 5 channels of analog auxiliary input/output Low power, <425 mW at maximum sample rates Supports full and half-duplex data interfaces Small 72-lead LFCSP lead-free package

16-Bit, 25 MSPS/65 MSPS/80 MSPS/105 MSPS, 1.8 V Dual Analog-to-Digital Converter (ADC) Features: 1.8 V analog supply operation 1.8 V CMOS or LVDS output supply SNR 82 dBFS at 30 MHz input and 105 MSPS data rate 83 dBFS at 9.7 MHz input and 25 MSPS data rate SFDR 90 dBc at 30 MHz input and 105 MSPS data rate 95 dBc at 9.7 MHz input and 25 MSPS data rate Low power 328 mW per channel at 105 MSPS 119 mW per channel at 25 MSPS Integer 1-to-8 input clock divider See data sheet for additional featuresAD9650-EP supports defense and aerospace applications (AQEC standard) Download AD9650-EP data sheet (pdf)