10-Bit Digital Temperature Sensor (AD7416) and Four Single-Channel ADCs

8BIT ADC CMOS SMD 9280 SSOP28; Resolution (Bits):8bit; Sampling Rate:32MSPS; Supply Voltage Type:Single; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; ADC / DAC Case Style:SSOP; No. of Pins:28Pins; Input Channel Type:Differential Single Ended; Data Interface:Parallel; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:Single 8-Bit Pipelined ADCs; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); A/D / D/A Features:CMOS Industrial Temperature Parallel O/P Sample and Hold; Base Number:9280; Conversion Time:0.03µs; IC Case Style:SSOP; IC Generic Number:9280; IC Temperature Range:Commercial; Linearity Error:0.2%; Linearity Error ADC / DAC +:0.5LSB; Linearity Error ADC / DAC -:0.5LSB; Logic Function Number:9280; No. of Bits:8bit; No. of Channels:1Channels; Operating Temperature Range:-40°C to +85°C; Supply Current:31.7mA; Supply Voltage Range:2.7V to 5.5V; Supply Voltage Range - Analogue:2.7V to 5.5V

HDMI/DVI Buffer with Equalization

Continuous Rate 10 Mb/s to 675 Mb/s Clock and Data Recovery IC with Integrated Limiting Amp Features: Serial data input: 10 Mb/s to 675 Mb/s Exceeds SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 3.3 mV typical Adjustable slice level: ±95 mV Patented clock recovery architecture Loss-of-signal (LOS) detect range: 2.3 mV to 19 mV Independent slice level adjust and LOS detector No reference clock required Loss-of-lock indicator I2C™ interface to access optional features Single-supply operation: 3.3 V Low power: 435 mW typical 5 mm × 5 mm, 32-lead LFCSP, Pb free

SUPERVISOR CIRCUIT MPU #1 SC-70-4; Threshold Voltage:2.32V; No. of Supervisors / Monitors:1Monitors; Supply Voltage Min:1.2V; Supply Voltage Max:5.5V; Reset Type:Active-Low Push-Pull; Digital IC Case:SC-70; No. of Pins:4Pins; Delay Time:240ms; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Cut Tape; Product Range:ADM6711 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

Ultralow Noise, High Accuracy Voltage References

VOLTAGE REF SERIES 5V NSOIC-8; Voltage Reference Type:Series - Fixed; Product Range:ADR4550 Series; Reference Voltage:5V; Initial Accuracy:0.04%; Temperature Coefficient:± 4ppm/°C; Voltage Reference Case Style:SOIC; No. of Pins:8Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Base Number:4550; Input Voltage:3V to 15V; Input Voltage Max:15V; Input Voltage Min:3V; Operating Temperature Range:-40°C to +125°C; Reference Volt Tolerance ±%:0.04%; Reference Volts:5V; Topology:Series

16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 77.6 dBFS at 9.7 MHz input 71.1 dBFS at 200 MHz input SFDR 93 dBc at 9.7 MHz input 80 dBc at 200 MHz input Low power 56 mW at 20 MSPS 113 mW at 80 MSPS Differential input with 700 MHz bandwidth See data sheet for additional featuresAD9266-EP supports defense and aerospace applications (AQEC standard) Download the AD9266-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/12660 DSCC Drawing Number

16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 77.6 dBFS at 9.7 MHz input 71.1 dBFS at 200 MHz input SFDR 93 dBc at 9.7 MHz input 80 dBc at 200 MHz input Low power 56 mW at 20 MSPS 113 mW at 80 MSPS Differential input with 700 MHz bandwidth See data sheet for additional featuresAD9266-EP supports defense and aerospace applications (AQEC standard) Download the AD9266-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/12660 DSCC Drawing Number

16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 77.6 dBFS at 9.7 MHz input 71.1 dBFS at 200 MHz input SFDR 93 dBc at 9.7 MHz input 80 dBc at 200 MHz input Low power 56 mW at 20 MSPS 113 mW at 80 MSPS Differential input with 700 MHz bandwidth See data sheet for additional featuresAD9266-EP supports defense and aerospace applications (AQEC standard) Download the AD9266-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/12660 DSCC Drawing Number

Dual, High Speed ECL Comparators

Low Phase Noise, Fast Settling PLL Frequency Synthesizer Features: New, fast settling, fractional-N PLL architecture Single PLL replaces ping-pong synthesizers Frequency hop across GSM band in 5 µs with phase settled by 20 µs 0.5° rms phase error at 2 GHz RF output Digitally programmable output phase RF input range up to 3.5 GHz 3-wire serial interface On-chip, low noise differential amplifier Phase noise figure of merit: –216 dBc/Hz Loop filter design possible using ADIsimPLL™ Qualified for automotive applications

High Common-Mode Rejection Differential Line Receiver

Precision RRIO Dual Op Amp Features: Single-supply operation  Wide bandwidth: 4 MHz  Low offset voltage: 65 μV  Unity-gain stable  High slew rate: 4.0 V/μs  Low noise: 3.9 nV/√HzOP284-EP supports defense and aerospace applications (AQEC standard) Download OP284-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14624 DSCC Drawing Number

Voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision Features: Complete 8-bit DAC Voltage Output-2 Calibrated Ranges Internal Precision Bandgap Reference Single-Supply Operation: +5 V to +15 V Full Microprocessor Interface Fast: 1 µs Voltage settling to ±1/2 LSB Low Power: 75 mW No User Trims Guaranteed Monotonic Over Temperature All Errors Specified Tmin to Tmax Small 16-Pin DIP and 20-PIN PLCC Packages Single Laser-Wafer-Trimmed Chip for Hybrids

ADI

Thermostats

RF Switch ICs

Data Acquisition ADCs/DACs - Specialised 20-Bit, 8-channel Sim Sampling DAQ System AD4858 Data Acquisition System (DAS) Analog Devices' AD4858 is a high-performance, buffered, simultaneous sampling Data Acquisition System (DAS) featuring configurable SoftSpan ranges for each channel. Key Features: Performance: The AD4858 features an 11 MHz bandwidth, picoamp input analog buffers, and a 120 dB common-mode rejection ratio (CMRR). This enables direct digitization of input signals with varying swings on INx+ and INx−. Precision: With ±160 μV integral nonlinearity (INL), no missing codes at 20 bits, a 97.2 dB signal-to-noise ratio (SNR), and a 111.4 dB dynamic range (DR), it is ideal for high accuracy, throughput, and precision applications. Flexibility: It supports 24-bit oversampling for enhanced SNR and dynamic range. Per-channel offset, gain, and phase adjustments allow for calibration and removal of system-level errors before data acquisition. Digital Interface: The AD4858 features a serial peripheral interface (SPI) register configuration bus (0.9 V to 5.25 V) and supports both LVDS and CMOS data output buses. Users can optimize bus width and throughput by employing between one and eight lines of data output in CMOS mode. Evaluation Kit: The EVAL-AD4858FMCZ evaluation kit demonstrates the AD4858's performance and provides access to various configuration options via an easy-to-use ACE plug-in graphical interface. Applications: Automatic test equipment Avionics and aerospace Instrumentation and control systems Semiconductor manufacturing Test and measurement

Data Conversion IC Development Tools LTC1668 with LT6600 Demo Board 16-Bit, 50Msps DAC, Differential +/-0.25V outputs