Low Noise, Low Input Bias Current, Rail-to-Rail Output, JFET Dual Operational Amplifier

3.6 V, 500 mA Logic Controlled High-Side Load Switch

12-Bit, SDTV/HDTV 3D Comb Filter, Video Decoder, and Graphics Digitizer Features: 4 Noise Shaped Video (NSV®) 12-bit ADCs True 12-bit high dynamic range processing 12-channel analog input mux 36-bit digital YCbCr/RGB output 12-bit deep color processing Analog monitor output NTSC/PAL/SECAM color standards support NTSC/PAL 3D comb filter 3D noise reduction (DNR) Advanced time-base correction (TBC) with frame synchronization Interlaced-to-progressive conversion for 525i and 625i Advanced VBI data slicer, including Teletext, CC, and V-chip

Low Cost, Low Power, True RMS-to-DC Converter Features: Delivers true rms or average rectified value of ac waveform Fast settling at all input levels Accuracy: ±10 μV ± 0.25% of reading (B grade) Wide dynamic input range  100 μV rms to 3 V rms (8.5 V p-p) full-scale input range  Larger inputs with external scaling Wide bandwidth: 1 MHz for −3 dB (300 mV)  65 kHz for additional 1% error Zero converter dc output offset No residual switching products Specified at 300 mV rms input  Accurate conversion with crest factors up to 10  Low power: 300 μA typical at ±2.4 V  High-Z FET separately powered input buffer RIN ≥ 1012 Ω, CIN ≤ 2 pF  Precision dc output buffer  Wide power supply voltage range Dual: ±2.4 V to ±18 V; single: 4.8 V to 36 V 4 mm × 4 mm LFCSP and 8 mm × 6 mm QSOP packages ESD protected

Low Cost, Low Power, True RMS-to-DC Converter

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Rail-to-Rail Output, Video Op Amps with Ultralow Power

Charge Pump Driver for LCD White LED Backlights

IC 16BIT DAC 400SPS SOIC24; Resolution (Bits):16bit; Sampling Rate:400SPS; Input Channel Type:Serial; Supply Voltage Range:12V to 32V; ADC / DAC Case Style:SOIC; No. of Pins:24Pins; Data Interface:SPI; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:AD420 Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); A/D / D/A Features:Internal Reference Latches Microprocessor Compatible; Base Number:420; Conversion Time:3µs; IC Case Style:SOIC; IC Generic Number:420; IC Temperature Range:Commercial; Linearity Error:0.012%; Logic Function Number:420; No. of Bits:16bit; No. of Channels:1Channels; Operating Temperature Range:-40°C to +85°C; Output Type:Current; Power Dissipation Ptot Max:120mW; Settling Time:3ms; Supply Current:4.2mA; Supply Voltage Max:32V; Supply Voltage Min:12V; Termination Type:Surface Mount Device

750 MHz, 8 × 8 Analog Crosspoint Switch

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Quad Matched 741-Type Operational Amplifer

350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator

+2.5V Low-Power Precision Voltage Reference

4-Channel, 12-/10-/8-Bit ADC with I2C-Compatible Interface in 8-Lead SOT-23

1.8 V to 5 V Auto-Zero, In-Amp with Shutdown Features: Low Offset Voltage: 20 µV max Low Input Offset Drift: 0.1 µV/°C High CMRR: 140 dB typ @ G=100 Non-Linearity 0.001% typ. @ G=100 Wide Gain Range: 0.1 to 10,000 Single Supply Operation: +1.8V to +5.5V Rail-to-Rail Output Shutdown capability

DIGITAL POT VOLATILE 10 KOHM NSOIC-8; End To End Resistance:10kohm; No. of Pots:Single; Control Interface:Serial SPI; Track Taper:Linear; Resistance Tolerance:± 1%; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:NSOIC; No. of Pins:8Pins; No. of Steps:256; Temperature Coefficient:500ppm/°C; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:-; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (12-Jan-2017)

Low Cost Micropower, Low Noise CMOS RRIO Quad Op Amp Features: Offset voltage: 2.2 mV maximum Low input bias current: 1 pA maximum Single-supply operation: 1.8 V to 5.5 V Low noise: 22 nV/√Hz Micropower: 50 μA/amplifier maximum over temperature No phase reversal Unity gain stable Qualified for automotive applications

Operational Amplifier Dual 5 MHz 2 2.4 V/ s 4.5V to 18V DIP 8 ;RoHS Compliant: No

Dual, 16-Bit, 1200 MSPS, TxDAC+Digital-to-Analog Converter Features: Flexible LVDS interface allows word, byte, or nibble load Single-carrier W-CDMA ACLR = 82 dBc @ 122.88 MHz IF Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω Novel 2×/4×/8× interpolator/complex modulator allows carrier placement anywhere in the DAC bandwidth Digital gain and phase adjustment for sideband suppression Multiple chip synchronization interfaces See data sheet for additional featuresAD9122-EP supports defense and aerospace applications (AQEC standard) Download AD9122-EP data sheet (pdf) Military temperature range (such as −55°C to +105°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12654 DSCC Drawing Number