Micropower, Step-Up/Step-Down SW Regulator; Adjustable and Fixed 3.3 V, 5 V, 12 V Features: Operates from 2 V to 30 V Input Voltage Range 72 kHz Frequency Operation Utilizes Surface Mount Inductors Very Few External Components Required Operates in Step-Up/Step-Down or Inverting Mode Low Battery Detector User Adjustable Current Limit Internal 1 A Power Switch Fixed or Adjustable Output Voltage 8-Pin DIP or SO-8 Package

12-Bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 71.3 dBFS at 9.7 MHz input 69.0 dBFS at 200 MHz input SFDR 95 dBc at 9.7 MHz input 83 dBc at 200 MHz input Low power 45 mW at 20 MSPS 85 mW at 80 MSPS Differential input with 700 MHz bandwidth On-chip voltage reference and sample-and-hold circuit 2 V p-p differential analog input DNL = ±0.16 LSB Serial port control options Offset binary, gray code, or twos complement data format Integer 1, 2, or 4 input clock divider Built-in selectable digital test pattern generation Energy-saving power-down modes Data clock out with programmable clock and data alignment

12-Bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V Analog-to-Digital Converter

10-Bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 61.5 dBFS at 9.7 MHz input 61.0 dBFS at 200 MHz input SFDR 75 dBc at 9.7 MHz input 73 dBc at 200 MHz input Low power 45 mW at 20 MSPS 76 mW at 80 MSPS Differential input with 700 MHz bandwidth On-chip voltage reference and sample-and-hold circuit 2 V p-p differential analog input DNL = ±0.10 LSB Serial port control options Offset binary, gray code, or twos complement data format Optional clock duty cycle stabilizer Integer 1-to-8 input clock divider Built-in selectable digital test pattern generation Energy-saving power-down modes Data clock out with programmable clock and data alignment

ADM6346 - Ultralow Power Microprocessor Reset Circuit

Ultralow Power, 3-Lead, SOT-23, Microprocessor Reset Circuit, Active-Low Push-Pull Output, 1 A Supply Current Features: Ultralow supply current of 1 μA maximum (ADM6326/ADM6328) Accurate monitoring of 2.5 V, 3 V, 3.3 V, and 5 V rails Reset thresholds available in increments from 2.2 V to 4.63 V Glitch immunity from negative-going VCC transients 2 reset output options Push-pull RESET (ADM6326/ADM6346) Open-drain RESET (ADM6328/ADM6348) Minimum reset timeout of 100 ms Operating temperature range of −40°C to +85°C 3-lead SOT-23 package

14-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter

20 MHz TO 1.0 GHz IF Gain Block Features: Fixed gain of 16 dB Operation from 20 MHz to 1.0 GHz Input and output internally matched to 50 Ω Integrated bias control circuit OIP3 45.5 dBm at 190 MHz 45.5 dBm at 380 MHz P1dB of 18.9 dBm at 190 MHz Noise figure 3.2 dB at 190 MHz 3.3 dB at 380 MHz Single 5 V power supply Low quiescent current of 97 mA MSL-1 rated SOT-89 package ESD rating of ±2 kV (Class 2) Pin-compatible with the 20 dB gain ADL5536

450 MHz TO 6000 MHz TruPwr Detector Features: True rms response detector Excellent temperature stability ±0.25 dB rms detection accuracy vs. temperature Over 35 dB input power dynamic range, inclusive of crest factor RF bandwidths from 450 MHz to 6000 MHz 500 Ω input impedance Single-supply operation: 2.5 V to 3.3 V Low power: 1.8 mA at 3.0 V supply RoHS compliant part

11.3 Gbps, Active Back-Termination, Differential Laser Diode Driver

SHARC Processor

Ethernet Clock Generator, 10 Clock Outputs Features: Fully integrated VCO/PLL core 0.17 ps rms jitter from 1.875 MHz to 20 MHz at 156.25 MHz 0.41 ps rms jitter from 12 kHz to 20 MHz at 125 MHz Input crystal or clock frequency of 25 MHz Preset divide ratios for 156.25 MHz, 33.33 MHz,100 MHz, and 125 MHz Choice of LVPECL or LVDS output format See datasheet for additional features

Ethernet Clock Generator, 10 Clock Outputs Features: Fully integrated VCO/PLL core 0.17 ps rms jitter from 1.875 MHz to 20 MHz at 156.25 MHz 0.41 ps rms jitter from 12 kHz to 20 MHz at 125 MHz Input crystal or clock frequency of 25 MHz Preset divide ratios for 156.25 MHz, 33.33 MHz,100 MHz, and 125 MHz Choice of LVPECL or LVDS output format See datasheet for additional features

Ethernet Clock Generator, 10 Clock Outputs Features: Fully integrated VCO/PLL core 0.17 ps rms jitter from 1.875 MHz to 20 MHz at 156.25 MHz 0.41 ps rms jitter from 12 kHz to 20 MHz at 125 MHz Input crystal or clock frequency of 25 MHz Preset divide ratios for 156.25 MHz, 33.33 MHz,100 MHz, and 125 MHz Choice of LVPECL or LVDS output format See datasheet for additional features

Ultralow Distortion Differential ADC Driver

Micropower, Low Noise Precision Voltage References with Shutdown

AD5253 - Quad 64-Position I2C Non-Volatile Memory Digital Potentiometer

14-Bit, 80 MSPS/105 MSPS/125 MSPS, 1.8 V Dual Analog-to-Digital Converter (ADC)

3.3 V, Load, 15kV ESD Protected, RS-485/RS-422 Transceiver (Half Duplex, 250 kbps, DE/RE) Features: TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins Data rates ADM3070E/ADM3071E/ADM3072E: 250 kbps ADM3073E/ADM3074E/ADM3075E: 500 kbps ADM3076E/ADM3077E/ADM3078E: 16 Mbps Half- and full-duplex options True fail-safe receiver inputs Up to 256 nodes on the bus −40°C to +125°C temperature option Hot-swap input structure on DE and RE pins Reduced slew rates for low EMI Low power shutdown current (all except ADM3071E/ ADM3074E/ADM3077E) Outputs high-Z when disabled or powered off Common-mode input range: −7 V to +12 V Thermal shutdown and short-circuit protection 8-lead and 14-lead narrow SOIC packages

3.3 V, Load, 15kV ESD Protected, RS-485/RS-422 Transceiver (Full Duplex, 500 kbps) Features: TIA/EIA RS-485/RS-422 compliant ±15 kV ESD protection on RS-485 input/output pins Data rates ADM3070E/ADM3071E/ADM3072E: 250 kbps ADM3073E/ADM3074E/ADM3075E: 500 kbps ADM3076E/ADM3077E/ADM3078E: 16 Mbps Half- and full-duplex options True fail-safe receiver inputs Up to 256 nodes on the bus −40°C to +125°C temperature option Hot-swap input structure on DE and RE pins Reduced slew rates for low EMI Low power shutdown current (all except ADM3071E/ ADM3074E/ADM3077E) Outputs high-Z when disabled or powered off Common-mode input range: −7 V to +12 V Thermal shutdown and short-circuit protection 8-lead and 14-lead narrow SOIC packages