28MHz, 12V/s, Single Supply Dual Precision Op Amps Features: Slew Rate: 12V/µs Typ Gain-Bandwidth Product: 28MHz Typ Fast Settling to 0.01% 2V Step to 200µV: 500ns Typ 10V Step to 1mV: 1.1µs Typ Excellent DC Precision in All Packages Input Offset Voltage: 275µV Max Input Offset Voltage Drift: 6µV/°C Max Input Offset Current: 40nA Max Input Bias Current: 200nA Max Open-Loop Gain: 1200V/mV Min Single Supply Operation Input Voltage Range Includes Ground Output Swings to Ground While Sinking Current Low Input Noise Voltage: 10nV/√Hz Typ Low Input Noise Current: 0.2pA/√Hz Typ Specified at 3.3V, 5V and ±15V Large Output Drive Current: 30mA Min Low Supply Current per Amplifier: 3.5mA Max Dual in 8-Pin DIP and SO-8 Quad in 14-Pin DIP and NARROW SO-16

Low Power 10MHz Current Feedback Amplifier Features: 1mA Quiescent Current 50mA Output Current (Minimum) 10MHz Bandwidth 500V/µs Slew Rate 280ns Settling Time to 0.1% Wide Supply Range, ±5V to ±15V 1mV Input Offset Voltage 100nA Input Bias Current 100MΩ Input Resistance

Precision Rail-to-Rail Input and Output Op Amp Features: Rail-to-Rail Input and Output 90µV VOS(MAX) for VCM = V– to V+ High Common Mode Rejection Ratio: 97dB Min C-Load™ Stable Version (LT1219) High AVOL: 500V/mV Minimum Driving 10kΩ Load Wide Supply Range: 2V to ±15V (LT1218/LT1219) 2V to ±5V (LT1218L/LT1219L) Shutdown Mode: IS < 30µA Low Supply Current: 420µA Max Low Input Bias Current: 18nA Typical 300kHz Gain-Bandwidth Product (LT1218) Slew Rate: 0.10V/µs (LT1218)

45MHz, 250V/s Operational Amplifier Features: Gain-Bandwidth: 45MHz Unity-Gain Stable Slew Rate: 250V/µs C-Load™ Op Amp Drives Capacitive Loads Maximum Input Offset Voltage: 1mV Maximum Input Bias Current: 300nA Maximum Input Offset Current: 300nA Minimum Output Swing Into 500Ω: ±12V Minimum DC Gain: 20V/mV, RL = 500Ω Settling Time to 0.1%: 75ns, 10V Step Settling Time to 0.01%: 95ns, 10V Step Differential Gain: 0.1%, AV = 2, RL = 150Ω Differential Phase: 0.2°, AV = 2, RL = 150Ω

Dual 100MHz Current Feedback Amplifiers Features: 100MHz Bandwidth 1000V/µs Slew Rate Low Cost 30mA Output Drive Current 0.04% Differential Gain 0.1° Differential Phase High Input Impedance: 25MΩ, 3pF Wide Supply Range: ±2V to ±15V Low Supply Current: 6mA Per Amplifier Inputs Common Mode to Within 1.5V of Supplies Outputs Swing Within 0.8V of Supplies

Precision Reference Features: Ultra-Low Drift: 5ppm/°C Max Trimmed to High Accuracy: 0.05% Max Industrial Temperature Range SO Package Operates in Series or Shunt Mode Pin Compatible with AD586, AD587 Output Sinks and Sources in Series Mode Very Low Noise < 1ppm P-P (0.1Hz to 10Hz) 100% Noise Tested > 100dB Ripple Rejection

Precision Reference Features: Ultra-Low Drift: 5ppm/°C Max Trimmed to High Accuracy: 0.05% Max Industrial Temperature Range SO Package Operates in Series or Shunt Mode Pin Compatible with AD586, AD587 Output Sinks and Sources in Series Mode Very Low Noise < 1ppm P-P (0.1Hz to 10Hz) 100% Noise Tested > 100dB Ripple Rejection

Precision Reference Features: Ultra-Low Drift: 5ppm/°C Max Trimmed to High Accuracy: 0.05% Max Industrial Temperature Range SO Package Operates in Series or Shunt Mode Pin Compatible with AD586, AD587 Output Sinks and Sources in Series Mode Very Low Noise < 1ppm P-P (0.1Hz to 10Hz) 100% Noise Tested > 100dB Ripple Rejection

Precision Reference Features: Ultra-Low Drift: 5ppm/°C Max Trimmed to High Accuracy: 0.05% Max Industrial Temperature Range SO Package Operates in Series or Shunt Mode Pin Compatible with AD586, AD587 Output Sinks and Sources in Series Mode Very Low Noise < 1ppm P-P (0.1Hz to 10Hz) 100% Noise Tested > 100dB Ripple Rejection

High Speed Current Mode Pulse Width Modulators Features: Low Start-Up Current: <250µA 50ns Current Sense Delay Current Mode Operation: To 500kHz Pin Compatible with UC1842 Series Undervoltage Lockout with Hysteresis No Cross-Conduction Current Trimmed Bandgap Reference 1A Totem Pole Output Trimmed Oscillator Frequency and Sink Current Active Pull-Down on Reference and Output During Undervoltage Lockout High Level Output Clamp: 18V Current Sense Leading Edge Blanking

Low Cost Dual and Triple 130MHz Current Feedback Amplifiers with Shutdown Features: 90MHz Bandwidth on ±5V 0.1dB Gain Flatness > 30MHz Completely Off in Shutdown, 0µA Supply Current High Slew Rate: 1600V/µs Wide Supply Range: ±2V(4V) to ±15V(30V) 60mA Output Current Low Supply Current: 5mA/Amplifier Differential Gain: 0.016% Differential Phase: 0.075° Fast Turn-On Time: 100ns Fast Turn-Off Time: 40ns 14-Pin and 16-Pin Narrow SO Packages

Low Power 5V RS232 Dual Driver/Receiver with 0.1F Capacitors Features: 10mA Max Supply Current ESD Protection over ±10kV Uses Small Capacitors: 0.1µF 120kBaud Operation for RL = 3k, CL = 2500pF 250kBaud Operation for RL = 3k, CL = 1000pF Outputs Withstand ±30V Without Damage CMOS Comparable Low Power: 40mW Operates from a Single 5V Supply Rugged Bipolar Design Outputs Assume a High Impedance State When Off or Powered Down Meets All RS232 Specifications Available With or Without Shutdown Absolutely No Latch-up Available in SO Package

Micropower High Efficiency 5V/12V Step-Up DC/DC Converter for Flash Memory Features: 12V at 120mA from 5V or 3.3V Supply Supply Voltage as Low as 1.8V Better High Current Efficiency Than CMOS Up to 89% Efficiency 120µA Quiescent Current Shutdown to 10µA Programmable 5V or 12V Output Low VCESAT Switch: 170mV at 1A Typical ILIM Pin Programs Peak Switch Current Uses Inexpensive Surface Mount Inductors 8-Lead DIP or SOIC Package

7A, Very Low Dropout Regulator Features: Low Dropout, 540mV at 7A Output Current Fast Transient Response Remote Sense 1mV Load Regulation Fixed 2.5V Output and Adjustable Output No Supply Sequencing Problems in Dual Supply Mode

7A, 4.6A, 3A Low Dropout Fast Response Positive Regulators Adjustable and Fixed Features: Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation: 0.05% Typical  Trimmed Current Limit On-Chip Thermal Limiting Standard 3-Pin Power Package

Micropower Step-Up DC/DC Converters in ThinSOT Features: Low Quiescent Current: 20µA in Active Mode <1µA in Shutdown Mode Operates with VIN as Low as 1V Low VCESAT Switch: 250mV at 300mA Uses Small Surface Mount Components High Output Voltage: Up to 34V Low Profile (1mm) ThinSOT™ Package

Micropower Inverting DC/DC Converters in SOT-23 Features: Low Quiescent Current: 20µA in Active Mode <1µA in Shutdown Mode Operates with VIN as Low as 1V Low VCESAT Switch: 250mV at 300mA Uses Small Surface Mount Components High Output Voltage: Up to –34V Tiny 5-Lead SOT-23 Package

30MHz, 10V/s, Quad Rail-to-Rail Input and Output Precision Op Amps Features: Gain-Bandwidth Product: 30MHz Slew Rate: 10V/μs Low Supply Current per Amplifier: 3.5mA Input Common Mode Range Includes Both Rails Output Swings Rail-to-Rail Input Offset Voltage, Rail-to-Rail: 525μV Max Input Offset Current: 150nA Max Input Bias Current: 1000nA Max Open-Loop Gain: 1000V/mV Min Low Input Noise Voltage: 6nV/√Hz Typ Low Distortion: –91dBc at 100kHz Wide Supply Range: 2.7V to ±15V Large Output Drive Current: 35mA Min Dual in 8-Pin PDIP and SO Packages Quad in Narrow 14-Pin SO Package

Micropower Rail-to-Rail Op Amp and Reference Features: Guaranteed Operation at 1.2V Op Amp and Reference on Single Chip Micropower: 130µA Supply Current Industrial Temperature Range SO-8 Packages Rail-to-Rail Output High Output Current: 20mA Min Output Drives 1000pF Capable of Floating Mode Operation Specified for 5V and ±5V Supplies Low Reference Drift: 30ppm/°C Industry Standard LM10 Pinout

Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp Features: Rail-to-Rail Input and Output Micropower: 50µA IQ, 44V Supply Operating Temperature Range: −40°C to 125°C Over-The-Top®: Input Common Mode Range Extends 44V Above VEE, Independent of VCC Low Input Offset Voltage: 225µV Max Specified on 3V, 5V and ±15V Supplies High Output Current: 18mA Output Shutdown Output Drives 10,000pF with Output Compensation Reverse Battery Protection to 27V High Voltage Gain: 2000V/mV High CMRR: 110dB 220kHz Gain-Bandwidth Product 8-Lead DFN, MSOP, PDIP and SO Packages