SigmaDSP Digital Audio Processor Features: Qualified for automotive applications Fully programmable audio DSP for enhanced sound processing Features SigmaStudio, a proprietary graphical programming tool for the development of custom signal flows Clock oscillator for generating master clock from crystal Up to 294.912 MHz, 32-bit SigmaDSP core at 1.2 V Up to 6144 SIMD instructions per sample at 48 kHz Up to 40 kWords of parameter/data RAM Up to 800 ms digital audio delay pool at 48 kHz Audio input/output and routing 4 serial input ports, 4 serial output ports 48-channel, 32-bit digital input/output up to a sample rate of 192 kHz Flexible configuration for TDM, I2S, left and right justified formats, and PCM Up to 8 stereo ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR Stereo S/PDIF input and output Four PDM microphone input channels Multichannel, byte addressable, TDM serial ports Integer PLL and flexible clock generators Integrated die temperature sensor

3-Channel Sigma-Delta ADC with SPI Features: One (ADE7903) 24-bit, Σ-Δ ADC (simultaneously sampling with three ADE7912/ADE7913 ADCs) On-chip temperature sensor 4-wire SPI serial interface Standalone 24-bit, Σ-Δ ADC Up to four ADE7903 and ADE7912/ADE7913 devices clocked from a single crystal or an external clock Synchronization of multiple ADE7903 and ADE7912/ADE7913 devices ±31.25 mV peak input range for current channel ±500 mV peak input range for voltage channels Single 3.3 V supply 20-lead, wide body SOIC package Operating temperature: −40°C to +85°C

Phase Detector / PLL Frequency Synthesizer Features: 400 MHz bandwidth 2.7 to 3.3 V power supply Separate charge pump supply (VP) allows extended tuning voltage in 3 V systems Programmable charge pump currents 3-wire serial interface Analog and digital lock detect Hardware and software power-down mode 104  MHz phase detectorADF4002-EP supports defense and aerospace applications (AQEC standard) Download ADF4002-EP data sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/11607 DSCC Drawing Number

Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA

Low Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain Features: Output IP3 at 100MHz: 40dBm Maximum Output Power: 16dBm Bandwidth: LF to 540MHz Propagation Delay: 0.8ns Maximum Gain: 27dB Gain Control Range: 22.5dB Gain Control Step: 1.5dB Gain Control Settling Time: 500ns Noise Figure: 8.6dB at 100MHz (Max Gain) Output Noise Floor: –138dBm/Hz (Max Gain) Reverse Isolation: –92dB Single Supply: 4.75V to 5.25V Shutdown Mode Enable/Disable Time: 1µs Differential I/O Interface 20-Lead TSSOP Package

1.5GHz to 2.5GHz High Linearity Direct Quadrature Modulator Features: Direct Conversion from Baseband to RF High Output: –2.5dB Conversion Gain High OIP3: +21.6dBm at 2GHz Low Output Noise Floor at 20MHz Offset: No RF: –158.6dBm/Hz POUT = 4dBm: –152.5dBm/Hz Low Carrier Leakage: –39.4dBm at 2GHz High Image Rejection: –41.2dBc at 2GHz 4-Channel W-CDMA ACPR: –67.7dBc at 2.14GHz Integrated LO Buffer and LO Quadrature Phase Generator 50Ω AC-Coupled Single-Ended LO and RF Ports High Impedance DC Interface to Baseband Inputs with 0.5V Common Mode Voltage 16-Lead QFN 4mm × 4mm Package

800MHz to 2.7GHz High Linearity Direct Conversion Quadrature Demodulator Features: Input Frequency Range: 0.8GHz to 2.7GHz* 50Ω Single-Ended RF and LO Ports High IIP3: 28dBm at 900MHz, 22.6dBm at 1.9GHz High IIP2: 54.1dBm at 900MHz, 60dBm at 1.9GHz Input P1dB: 13.2dBm at 900MHz I/Q Gain Mismatch: 0.04dB Typical I/Q Phase Mismatch: 0.4° Typical Low Output DC Offsets Noise Figure: 12.8dB at 900MHz, 12.7dB at 1.9GHz Conversion Gain: 3dB at 900MHz, 4.2dB at 1.9GHz Very Few External Components Shutdown Mode 16-Lead QFN 4mm × 4mm Package with Exposed Pad

Dual 1.8V, 13A Precision Rail-to-Rail Op Amp Features: Ideal for Battery-Powered Applications Low Voltage: 1.8V to 16V Operation Low Current: 16µA/Amplifier Max Small Packages: DFN, MSOP, SSOP Shutdown to 1.5µA Max (LT6000, LT6001DD) Low Offset Voltage: 600µV Max Rail-to-Rail Input and Output Fully Specified on 1.8V and 5V Supplies Operating Temperature Range: –40°C to 85°C Single Available in DFN Dual Available in MSOP and DFN Quad Available in SSOP and DFN

Dual 1.8V, 13A Precision Rail-to-Rail Op Amp Features: Ideal for Battery-Powered Applications Low Voltage: 1.8V to 16V Operation Low Current: 16µA/Amplifier Max Small Packages: DFN, MSOP, SSOP Shutdown to 1.5µA Max (LT6000, LT6001DD) Low Offset Voltage: 600µV Max Rail-to-Rail Input and Output Fully Specified on 1.8V and 5V Supplies Operating Temperature Range: –40°C to 85°C Single Available in DFN Dual Available in MSOP and DFN Quad Available in SSOP and DFN

Dual 1.8V, 13A Precision Rail-to-Rail Op Amp Features: Ideal for Battery-Powered Applications Low Voltage: 1.8V to 16V Operation Low Current: 16µA/Amplifier Max Small Packages: DFN, MSOP, SSOP Shutdown to 1.5µA Max (LT6000, LT6001DD) Low Offset Voltage: 600µV Max Rail-to-Rail Input and Output Fully Specified on 1.8V and 5V Supplies Operating Temperature Range: –40°C to 85°C Single Available in DFN Dual Available in MSOP and DFN Quad Available in SSOP and DFN

Dual 1.6V, 1A Precision Rail-to-Rail Input and Output Op Amp Features: Wide Supply Range: 1.6V to 16V Low Supply Current: 1μA/Amplier Max Low Input Bias Current: 90pA Max Low Input Offset Voltage: 500μV Max Low Input Offset Voltage Drift: 2μV/°C CMRR: 100dB PSRR: 95dB AVOL Driving 20kΩ Load: 100,000 Min Capacitive Load Handling: 500pF Specied from -40°C to 125°C Available in Tiny 2mm x 2mm DFN and Low Prole (1mm) ThinSOT™ Packages

Dual/Quad 135A, 14nV/Hz, Rail-to-Rail Output Precision Op Amp Features: 60µV Maximum Offset Voltage 300pA Maximum Input Bias Current 135µA Supply Current per Amplifier Rail-to-Rail Output Swing 120dB Minimum Voltage Gain, VS = ±15V 0.8µV/°C Maximum VOS Drift 14nV/√Hz Input Noise Voltage 2.7V to ±18V Supply Voltage Operation Operating Temperature Range: –40°C to 85°C Space Saving 3mm x 3mm DFN Package

Precision, Rail-to-Rail Input Current Sense Amplifier Features: Very Wide, Over-the-Top®, Input Common Mode Range   - Extends 44V Above V – (Independent of V +)   - Extends –0.3V Below V – Wide Power Supply Range: 2.85V to 36V Input Offset Voltage: 300µV Maximum Gain Accuracy: 1% Max Gain Congurable with External Resistors Operating Current: 150µA Slew Rate: 2V/µs Sense Input Current When Powered Down: 1nA Full-Scale Output Current: 1mA Minimum Operating Temperature Range –40°C to 125°C Available in 2mm × 3mm DFN and 8-Lead MSOP Packages

High Side Current Sense Amplifier with Reference and Comparator Features: Current Sense Amplifier Fast Step Response: 500ns Low Offset Voltage: 125μV Maximum Low Gain Error: 0.2% Maximum Internal 400mV Precision Reference Internal Comparator Fast Response Time: 500ns Total Threshold Error: ±1.25% Maximum Latching or Non-Latching Comparator Option Wide Supply Range: 2.7V to 60V Supply Current: 450μA Low Shutdown Current: 5μA Maximum Specified for –40°C to 125°C Temperature Range Available in 8-Lead MSOP and 8-Lead (2mm × 3mm) DFN Packages

High Side Current Sense Amplifier with Reference and Comparators Features: Current Sense Amplifier Fast Step Response: 500ns Low Offset Voltage: 125μV Maximum Low Gain Error: 0.2% Maximum Internal 400mV Precision Reference Internal Latching Comparators with Reset Fast Response Time: 500ns Total Threshold Error: ±1.25% Maximum Two Comparator Polarity Options Wide Supply Range: 2.7V to 60V Supply Current: 550μA Low Shutdown Current: 5μA Maximum Specified for –40°C to 125°C Temperature Range Available in 10-Lead MSOP Package

Dual 100MHz, Rail-to-Rail Input and Output, Ultralow 1.9nVHz Noise, Low Power Op Amps Features: Low Noise Voltage: 1.9nV/√Hz (100kHz) Low Supply Current: 3mA/Amp Max Gain Bandwidth Product: 100MHz Dual LT6203 in Tiny DFN Package Low Distortion: –80dB at 1MHz Low Offset Voltage: 500μV Max Wide Supply Range: 2.5V to 12.6V Input Common Mode Range Includes Both Rails Output Swings Rail-to-Rail Common Mode Rejection Ratio 90dB Typ Unity Gain Stable Low Noise Current: 1.1pA/√Hz Output Current: 30mA Min Operating Temperature Range –40°C to 85°C Low Profile (1mm) SOT-23 (ThinSOT™) Package

215MHz, Rail-to-Rail Output, 1.1nV/Hz, 3.5mA Op Amp Family Features: Low Noise Voltage: 1.1nV/√Hz Low Supply Current: 3.5mA/Amp Max Low Offset Voltage: 350μV Max Gain Bandwidth Product: LT6230: 215MHz; AV ≥ 1 LT6230-10: 1450MHz; AV ≥ 10 Wide Supply Range: 3V to 12.6V Output Swings Rail-to-Rail Common Mode Rejection Ratio: 115dB Typ Output Current: 30mA Operating Temperature Range: –40°C to 85°C LT6230 Shutdown to 10μA Maximum LT6230/LT6230-10 in a Low Profile (1mm) ThinSOT™ Package Dual LT6231 in 8-Pin SO and Tiny DFN Packages LT6232 in a 16-Pin SSOP Package

215MHz, Rail-to-Rail Output, 1.1nV/Hz, 3.5mA Op Amp Family Features: Low Noise Voltage: 1.1nV/√Hz Low Supply Current: 3.5mA/Amp Max Low Offset Voltage: 350μV Max Gain Bandwidth Product: LT6230: 215MHz; AV ≥ 1 LT6230-10: 1450MHz; AV ≥ 10 Wide Supply Range: 3V to 12.6V Output Swings Rail-to-Rail Common Mode Rejection Ratio: 115dB Typ Output Current: 30mA Operating Temperature Range: –40°C to 85°C LT6230 Shutdown to 10μA Maximum LT6230/LT6230-10 in a Low Profile (1mm) ThinSOT™ Package Dual LT6231 in 8-Pin SO and Tiny DFN Packages LT6232 in a 16-Pin SSOP Package

215MHz, Rail-to-Rail Output, 1.1nV/Hz, 3.5mA Op Amp Family Features: Low Noise Voltage: 1.1nV/√Hz Low Supply Current: 3.5mA/Amp Max Low Offset Voltage: 350μV Max Gain Bandwidth Product: LT6230: 215MHz; AV ≥ 1 LT6230-10: 1450MHz; AV ≥ 10 Wide Supply Range: 3V to 12.6V Output Swings Rail-to-Rail Common Mode Rejection Ratio: 115dB Typ Output Current: 30mA Operating Temperature Range: –40°C to 85°C LT6230 Shutdown to 10μA Maximum LT6230/LT6230-10 in a Low Profile (1mm) ThinSOT™ Package Dual LT6231 in 8-Pin SO and Tiny DFN Packages LT6232 in a 16-Pin SSOP Package

Low Noise Single-Ended to Differential Converter/ADC Driver Features: Rail-to-Rail Input and Outputs Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step 1.9nV/√Hz Input-Referred Op Amp Noise High Impedance Input –3dB Bandwidth: 33MHz 2.7V to 12V Supply Operation No External Gain Resistors Required 4.8mA Supply Current Low Power Shutdown Low Distortion (HD2/HD3): –102dBc/–97dBc at 100kHz, VOUTDIFF = 4VP-P Low Offset Voltage: ±400μV Max High DC Linearity: <±1LSB, 16-Bit, 8VP-P Low Input Current Noise: 1.1pA/√Hz 3mm × 3mm 8-Pin DFN and 8-Lead MSOP Packages