Manufacturer

Displaying 5761 - 5780 of 6424

Application Notes from Texas Instruments

Using The TPS6235x Without The I2C Interface

Texas Instruments
The TPS6235x series of DC/DC converters have an I2C-compatible interface that facilitates changing the output voltage for dynamic voltage-scaling applications. However it is possible to use the TPS6235x series of converters without the I2C interface as a standalone DC/DC converter that can be dynamically switched between two fixed voltages. This technique does not work for the TPS62351.

BQ24751x Device Comparison (Rev. A)

Texas Instruments
This application report presents the differences among bq24751, bq24751A, and bq24751B. It is intended to assist design engineers in selecting the most suitable device for their applications.

Parallelization of a H.263 Encoder for the TMS320C80 MVP

Texas Instruments
The coding of digital video sequences has been paid increasing attention over the past few years. Algorithms and standards such as MPEG1 MPEG2 or H.261 have been developed allowing more and more compression. A new standard in this field is H.263 which has been recently adopted by the ITU. It is intended for videoconferencing videophoning surveillance and other low bit rate applications (below 2

APA Outputs Connected to Other Devices

Texas Instruments
General APA Outputs Connected to Other Devices

U-507 Using the bq2005 to Control Fast Charge

Texas Instruments
The bq2005 is a fast-charge IC that provides comprehensive fast-charge control functions and high-speed switching power-control circuitry on a monolithic CMOS device. The bq2005 offers sequential char

TPS61040 Inverter Design (Rev. A)

Texas Instruments
Although designed to be a positive voltage boost converter, the TPS61040 can be configured as an inverting converter using an OPA348 operational amplifier or equivalent to invert the feedback signal.

Average Current Mode Controlled Power Factor Correction Converter..TMS320LF2407A (Rev. A)

Texas Instruments
Low cost high performance DSP controllers with integrated peripherals such as analog-to-digital (A/D) converters and pulse width modulator (PWM) have enabled the power supply designers with a new tool for implementing control for their power conversion functions. However the power designers with mostly analog control experience are faced with new challenges as they start to adopt this new tech

Using Low Voltage SWIFT DC/DC Converters with Ceramic Capacitors

Texas Instruments
This application note investigates an adequate phase margin for stable operation of SWIFT™ regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFT™ regulat

Headset Detection for TLV320AIC33 and TLV320AIC310x Family

Texas Instruments
A common feature in most of today's electronic devices – including cell phone PDAs notebooks handheld media players game systems etc. – is the provision for connecting to external accessories. The devices therefore include dedicated logic circuitry that can detect not only the presence of an accessory but also its type.The TLV320AIC33 and TLV320AIC3101/4/5/6 family includes extensive ca

AN-2006 Synchronizing a DP83640 PTP Master to a GPS Receiver (Rev. A)

Texas Instruments
This application report discusses methods of synchronizing the precision time protocol (PTP) clock to aGPS receiver using the DP83640 precision PHYTER™.

VCC vs System Speed of MSP430F21x1

Texas Instruments

This document provides analysis details and specific results of the CPU45 errata affecting the following devices:

  • MSP430F2131
  • MSP430F2121
  • MSP430F2111
  • MSP430F2101

TLC770x Series of BiCMOS Supply Voltage Supervisors

Texas Instruments
This report describes the function and application of the supply voltage supervisor circuit TLC770X. Besides a detailed functional description the behavior of line and battery operated power supplies during power-up as well as the behavior of digital circuits is presented. Finally application-examples of supply voltage supervision in general and supply voltage supervision in systems are described

Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using bq26500

Texas Instruments
The bq26500 is the first complete battery fuel gauge for handheld devices such as PDAs and cellular handsets. Many of these applications use only one Li-Ion or Li-Polymer cell in the battery, producin

Efficient Multiplication and Division Using MSP430

Texas Instruments
Efficient Multiplication and Division Using MSP430

AN-662 COP800 Based Automated Security/Monitoring System

Texas Instruments
AN-662 COP800 Based Automated Security/Monitoring System

LSP 1.20 DaVinci Linux Drivers (Rev. A)

Texas Instruments
LSP 1.20 DaVinci Linux Drivers Data Manual

Building a QAM Modulator

Texas Instruments
This report describes how one can use the GC2011 Digital Filter chip to build digital modulators for most BPSK QPSK and QAM radio signals. The modulator described here will accept a data stream with a symbol rate equal to B (standing for baud) and will output a modulated QAM signal centered at an IF frequency equal to the symbol rate or twice the symbol rate (B or 2B). A typical application woul

Displaying 5761 - 5780 of 6424

Latest Parts

SC1112

Raspberry Pi

$79.61 - $80.00

IN STOCK 12660
Buy

ASX00049

Arduino

* $38.92 - * $45.03

IN STOCK 3123
Buy

AD96685BRZ

Analog Devices Inc.

$1.72 - * $11.96

IN STOCK 4899
Buy

Reference Designs

RD006

Wurth Elektronik

RD006 - 3 W Dual-output isolated auxiliary supply for communication interfaces and measurement systems

CN0583

Analog Devices Inc.

Multistandard Micropower Verified Smoke Detection System-on-Module

Technical Resources

EVALUATION KITS

EVAL-AD7124-8SDZ

Analog Devices Inc.

$71.95 - * $77.04

IN STOCK 805
Buy
View All